Service Message
In order to give the car owner greater possibility of having maintenance service done at the right time, the driver is informed when it is time to book a time for maintenance service. The service message is shown before the actual conditions for the service interval are fulfilled, to avoid exceeding the service interval.
The service message is shown as a text message in the Driver information module (DIM) in the following steps:
- Book time for service
The text message "Book time for service" is shown when any of the following conditions is fulfilled:
- 1, 250 km (777 miles) before distance condition for service interval.
- 1 month before time condition for service interval.
- 100 hours before engine time condition for service interval.
- time for service
The text message "Time for service" is shown when any of the conditions for service interval is fulfilled. The service interval is dependent on model, engine, and market, and thus it varies.
An example of condition for a service interval may be:
- Distance condition - 15, 000 km.
- Time condition - 12 months.
- Engine time condition - 750 hours.
- Time for service exceeded
The text message "Time for service exceeded" is shown when any or several of the conditions for service interval are fulfilled, and any of the following conditions is fulfilled:
- 1, 250 km (777 miles) after distance condition for service interval.
- 1 month after time condition for service interval.
- 100 hours after engine time condition for service interval.
The service message continues to be shown every time the ignition is turned on, until maintenance service is done and the service message has been erased.
The conditions for showing the service message can be programmed according to three different parameters:
- Distance condition - Driving distance.
- Time condition - Number of months since last service.
- Engine time condition- Number of hours engine has been running.
The engine oil's quality also has an impact on when the service message is shown. However, this parameter cannot be programmed.
The service message may vary depending on market and/or language.