Location Of Control Modules On The Most Network

Fig 1: Identifying MOST Network

Courtesy of VOLVO CARS CORPORATION

NOTE:

The control modules on the MOST network should be positioned in a particular order. If this order is not followed, the fault-tracing of the MOST network will be more difficult.

When a control module is added to the MOST network, it should be placed in the correct order on the network to make it easier to fault-trace the control modules.

If the control modules are connected in another order, this does not effect the function of the MOST network, but fault-tracing will be more difficult.

The control modules are positioned in the following order (applies to XC70 from and including structure week 200946):

Infotainment control module (ICM)
Phone module (PHM)/ Bluetooth phone module (BPM)
Audio module (AUD)
Multimedia module (MMM)
Subwoofer module (SUB)
Remote digital audio receiver (RDAR) (only USA market)/Digital Audio Broadcast Module (DABM) (applies to all other markets from and incl. structure week 200846)
Integrated Audio Module (IAM)
Accessory USB unit (AUU)

If the minimum configuration of control modules on the MOST network in the car is used, the following control modules are connected:

Infotainment control module (ICM)
Integrated Audio Module (IAM)