Service Menu For Changing The Driver/Passenger Settings

All replacement parts of the DVD device are coded for the driver's side). To install a DVD device on the passenger side so that it corresponds with the remote control it must be recoded to.

Do as follows to open the menu for changing the / settings: 

1. Turn on the ignition.
2. Activating the system for rear seat entertainment.
   NOTE:

   There must not be a disc in the DVD player.

3. Press or on the remote control depending on which DVD device is to be coded.
   NOTE:

   Ensure that only the DVD unit to be coded is active.

4. Point the remote control at the DVD device to be coded and press the following sequence: UP  , RIGHT  , LEFT  , DOWN  and then.
5. Select the applicable coding for the relevant DVD device by scrolling the menu with the LEFT  arrow. Then press to confirm and exit the menu.
6. Deactivating the system for rear seat entertainment.