LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2011 >> C30 R-Design, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control Module (BCM) - Specifications, Electrical/Electronic >> Brake Control Module (BCM) >> Component Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Specifications

The component specification gives the value of the component when the connector is disconnected. Where no value is given, it is not possible to measure a relevant value at the component.

The figure within the brackets indicates the terminal pin on the component to which the value refers.

Designation  Type  Supply voltage  Value  Other 
Body sensor cluster stability sensor (BSC) CAN node with integrated yaw rate sensor, lateral accelerometer and accelerometer (AWD only) 12 V
(#3)		 - The body sensor cluster stability sensor (BSC) contains either two (2WD) or three (AWD) sensors and is connected to the brake control module (BCM) by its own CAN lead.
Wheel sensor Hall sensor 12 V (#1) Tooth against sensor:
I≈ 14 mA
U≈ 9 V
Cover against sensor:
I≈ 7 mA
U≈ 1 V
below Ubat		 -
Pedal position sensor Slide potentiometer 5 V (#1) 0 mm:
≈ 0 V
38.5 mm:
≈ 95% of Ubat		 -
scientia non olet · About LEMON Manuals