Parameter, Status

GEAR POSITION 

Only vehicles that have an automatic transmission.

The engine control module (ECM) calculates the status of the signal from the directly connected cable from the transmission control module (TCM).

P/N engaged = gear selector position is in "Park" or "Neutral".

P/N disengaged = the gear selector position is not in "Park" or "Neutral".

GEAR POSITION (VIA CAN) 

Only vehicles that have an automatic transmission.

the engine control module (ECM) calculates the status of the signal from the transmission control module (TCM) via CAN.

P/N engaged = gear selector position is in "Park" or "Neutral".

P/N disengaged = the gear selector position is not in "Park" or "Neutral".

POWER SUPPLY MODE 

The value indicates the status of the power supply mode.

• Key removed
• Key recently removed
• Key approved
• Ignition off after Accessory position
• Accessory position
• Accessory position after Ignition on
• Ignition on
• Combustion engine running
• Combustion engine in auto-stop
• Combustion engine in start attempt
• Combustion engine in start attempt at manual start

IGNITION SWITCH POSITION (VIA CAN) 

The engine control module (ECM) calculates the status of the signal from the central electronic module (CEM) via CAN communication.

STARTER RELAY 

The status indicates if the engine control module (ECM) requested activation of the starter relay.

Active = Engine control module (ECM) activates starter relay.

Not active = Engine control module (ECM) does not activate starter relay.

BRAKE LIGHT SWITCH 

The engine control module (ECM) calculates the value from the brake lamp switch signal.

Activated = brake light switch actuated.

Not activated = stop lamp switch unaffected.