Emissions Warning Lamp
The emissions warning lamp in the Driver Information Module (DIM) has a warning symbol. This warning symbol varies depending on the market. The warning symbols are:
- "Engine symbol" (not USA)
- "CHECK ENGINE" (MIL - Malfunction Indicator Lamp, only USA).
The warning lamp lights when the start control module (SCU) is moved to position II. The warning lamp goes out after approximately 15 seconds or if the engine is started when no fault is detected in the engine control system.
If Readiness is not complete (certain diagnostic functions have not been run through) the warning lamp will flash instead of going out when the start control module (SCU) is in position II.
The warning lamp will light if there is a fault in one of the parameters in the engine management system. The warning lamp will also light in response to a request transmitted via the control area network (CAN) if there is a fault in the transmission control module (TCM) which affects emissions.