Parameters, Value

THROTTLE ANGLE (%) 

Measurement range 0 - 100 %.

The engine control module (ECM) calculates the value from potentiometer 1 for the throttle position sensor. The value indicates the throttle opening. If the engine control module (ECM) detects a fault in the throttle position sensor potentiometer 1, the value from the throttle position sensor potentiometer 2 will be used to represent the throttle angle. This presumes that the function of throttle position sensor potentiometer 2 is OK.

0 % = throttle shut.

100 % = throttle fully open. This corresponds to an opening angle of approximately 84 degrees.

THROTTLE POSITION, CIRCUIT 1 (%) 

Measurement range: -3 to +130 %.

Normal value: 0 - 100 %.

There is an electrical fault if the displayed value is outside the measurement range. The value must increase with increased throttle angle.

Approximately 0 % = throttle closed.

Approximately 100 % = wide open throttle (WOT). This corresponds to an opening angle of approximately 84 degrees.

THROTTLE POSITION, CIRCUIT 2 (%) 

Measurement range: -4 to +140 %.

Normal value: 0 - 100 %.

There is an electrical fault if the displayed value is outside the measurement range. The value must increase with increased throttle angle.

Approximately 0 % = throttle closed.

Approximately 100 % = wide open throttle (WOT). This corresponds to an opening angle of approximately 84 degrees.