Brake Control Module (BCM) Diagnostic Trouble Codes

• BCM-0010: Wheel Sensor Left Front. Faulty Signal (2007-11)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking The Connectors On The Brake Control Module (BCM) And Wheel Sensor
    • Checking The Wiring And Sensors
    • Verification
    • Information
      • Fault-Tracing Information
    • Anti-Lock Brake System (Abs) Wiring
      • Removal And Installation
• BCM-0010: Wheel Sensor Left Front. Faulty Signal (2006)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking The Connectors On The Brake Control Module (BCM) And Wheel Sensor
    • Checking The Wiring And Sensors
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0010: Wheel Sensor Left Front. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information
• BCM-0011: Wheel Sensor Left Front. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking The Wheel Sensor And Pulse Wheel
    • Checking The Brakes And Wheel Bearings
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0011: Wheel Sensor Left Front. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
• BCM-0012: Wheel Sensor Left Front. Mechanical Fault (2006-11)
  • Diagnostic Trouble Code (DTC) Information
  • Mechanical Fault
    • Checking The Wheel Sensor And Pulse Wheel
    • Checking The Connectors And Cables
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0012: Wheel Sensor Left Front. Mechanical Fault (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information
  • Mechanical Fault
• BCM-0030: Wheel Sensor Left Rear. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking The Connectors For The Control Module And Wheel Sensor
    • Checking The Wiring And Sensors
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0030: Wheel Sensor Left Rear. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
• BCM-0050: Control Module. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0050
  • Faulty Signal
    • Reading Off Diagnostic Trouble Codes (DTCS)
    • Erasing Diagnostic Trouble Code (DTC)
    • Checking Diagnostic Trouble Codes (DTCS)
    • Fault-Tracing Information
• BCM-0050: Control Module. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0050
  • Faulty Signal
• BCM-0052: Control Module. Internal Fault (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0052
  • Internal Fault
    • Reading Off Diagnostic Trouble Codes (DTCS)
    • Replacing The Brake Control Module (BCM), Calibration
• BCM-0052: Control Module. Internal Fault (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0052
  • Internal Fault
• BCM-0057: Power Supply. Voltage Too Low (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0057
  • Voltage Too Low
    • Checking Battery Voltage
    • Checking The Power Supply
    • Checking The System Voltage
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0057: Power Supply. Voltage Too Low (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0057
  • Voltage Too Low
• BCM-0058: Power Supply. Voltage Too High (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0058
  • Voltage Too High
    • Checking The Battery Voltage
    • Fault-Tracing Information
• BCM-0058: Power Supply. Voltage Too High (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0058
  • Voltage Too High
• BCM-0061: Brake Discs. Temperature Too High (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0061
  • Temperature Too High
    • Visual Inspection Of Brakes
• BCM-0061: Brake Discs. Temperature Too High (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0061
  • Temperature Too High
• BCM-0068: Sensor Power Supply. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0068
  • Faulty Signal
    • Checking The Connectors
    • Checking The Wiring And Component
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0068: Sensor Power Supply. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0068
  • Faulty Signal
• BCM-0070: Power Supply For The Pump Motor. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0070
  • Faulty Signal
    • Checking The Operation Of The Pump Motor
    • Checking The Wiring And Component
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0070: Power Supply For The Pump Motor. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0070
  • Faulty Signal
• BCM-0071: Pump Motor. Signal Missing (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0071
  • Signal Missing
    • Checking The Operation Of The Pump Motor
    • Checking The Wiring And Component
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0071: Pump Motor. Signal Missing (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0071
  • Signal Missing
• BCM-0072: Pump Motor. Mechanical Fault (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0072
  • Mechanical Fault
    • Checking The Operation Of The Pump Motor
    • Checking The Wiring And Component
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0072: Pump Motor. Mechanical Fault (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0072
  • Mechanical Fault
• BCM-0074: Hydraulic Valves. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0074
  • Faulty Signal
    • Checking The Function Of The Hydraulic Valves
    • Replacing The Brake Control Module (BCM), Calibration
• BCM-0074: Hydraulic Valves. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0074
  • Faulty Signal
• BCM-0076: Control Module. Faulty Configuration (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0076
  • Faulty Configuration
    • Erasing Diagnostic Trouble Codes (DTCS)
    • Reading Off Diagnostic Trouble Codes (DTCS)
    • Resetting And Configuring The Brake Control Module (BCM)
    • Information
      • Fault-Tracing Information
• BCM-0076: Control Module. Faulty Configuration (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0076
  • Faulty Configuration
• BCM-0080: Lateral Accelerometer. Incorrect Offset Value (2006-11)
  • Diagnostic Trouble Code (DTC) Information
  • Incorrect Offset Value
    • Checking The Component
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0080: Lateral Accelerometer. Incorrect Offset Value (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information
  • Incorrect Offset Value
• BCM-0090: Lateral Accelerometer. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Replacing The Body Sensor Cluster Stability Sensor (BSC)
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0090: Lateral Accelerometer. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
• BCM-0091: Accelerometer. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0091
  • Faulty Signal
    • Replacing The Body Sensor Cluster Stability Sensor (BSC)
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0091: Accelerometer. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0091
  • Faulty Signal
• BCM-0094: Communication Between Control Modules. Communication Problems With The Differential Electronic Module (DEM) (2006-11)
  • Communication Problems With The Differential Electronic Module (DEM)
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Checking The Wiring And Terminals
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information BCM-0094
• BCM-0094: Communication Between Control Modules. Communication Problems With The Differential Electronic Module (DEM) (B5254T7; 2011-13)
  • Communication Problems With The Differential Electronic Module (DEM)
  • Diagnostic Trouble Code (DTC) Information BCM-0094
• BCM-0095: Communication Between Control Modules. Communication Problems With The Differential Electronic Module (DEM) (2006-11)
  • Communication Problems With The Differential Electronic Module (DEM)
    • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information BCM-0095
• BCM-0095: Communication Between Control Modules. Communication Problems With The Differential Electronic Module (DEM) (B5254T7; 2011-13)
  • Communication Problems With The Differential Electronic Module (DEM)
  • Diagnostic Trouble Code (DTC) Information BCM-0095
• BCM-0096: Sensor Cluster. Faulty Signal (2008-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0096
  • Faulty Signal
    • Replacing The Body Sensor Cluster Stability Sensor (BSC)
• BCM-0096: Sensor Cluster. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0096
  • Faulty Signal
• BCM-0097: Communication Between Control Modules. Communication Problems With The Central Electronic Module (CEM) (2006-11)
  • Communication Problems With The Central Electronic Module (CEM)
    • Information
    • Checking The Central Electronic Module (CEM)
  • Diagnostic Trouble Code (DTC) Information BCM-0097
• BCM-0097: Communication Between Control Modules. Communication Problems With The Central Electronic Module (CEM) (B5254T7; 2011-13)
  • Communication Problems With The Central Electronic Module (CEM)
  • Diagnostic Trouble Code (DTC) Information BCM-0097
• BCM-0100: Communication Between Control Modules. Communication Problems With The Engine Control Module (ECM) (2006-11)
  • Communication Problems With The Engine Control Module (ECM)
    • Information
    • Checking Diagnostic Trouble Codes (DTCS) In The Engine Control Module (ECM)
  • Diagnostic Trouble Code (DTC) Information BCM-0100
• BCM-0100: Communication Between Control Modules. Communication Problems With The Engine Control Module (ECM) (B5254T7; 2011-13)
  • Communication Problems With The Engine Control Module (ECM)
  • Diagnostic Trouble Code (DTC) Information BCM-0100
• BCM-0101: Communication Between Control Modules. Communication Problems With The Engine Control Module (ECM) (2006-11)
  • Communication Problems With The Engine Control Module (ECM)
    • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information BCM-0101
• BCM-0101: Communication Between Control Modules. Communication Problems With The Engine Control Module (ECM) (B5254T7; 2011-13)
  • Communication Problems With The Engine Control Module (ECM)
  • Diagnostic Trouble Code (DTC) Information BCM-0101
• BCM-0103: Pedal Position Sensor. Faulty Signal (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0103
  • Faulty Signal
    • Checking The Connectors
    • Checking The Wiring And Sensors
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0103: Pedal Position Sensor. Faulty Signal (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0103
  • Faulty Signal
• BCM-0105: Steering Wheel, Wheel Alignment. Signal Outside Its Permitted Range (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0105
  • Signal Outside Its Permitted Range
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Checking The Front Wheel Alignment
    • Calibration
    • Intermittent Fault
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0105: Steering Wheel, Wheel Alignment. Signal Outside Its Permitted Range (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0105
  • Signal Outside Its Permitted Range
• BCM-0106: Steering Wheel, Wheel Alignment. Incorrect Steering Wheel Or Wheel Alignment (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0106
  • Incorrect Steering Wheel Or Wheel Alignment
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Checking The Front Wheel Alignment
    • Calibration
    • Intermittent Fault
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0106: Steering Wheel, Wheel Alignment. Incorrect Steering Wheel Or Wheel Alignment (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0106
  • Incorrect Steering Wheel Or Wheel Alignment
• BCM-0108: Communication Between Control Modules. Communication Problems With The Steering Wheel Module (SWM), Control Module Not Initiated (2006-11)
  • Communication Problems With The Steering Wheel Module (SWM), Control Module Not Initiated
    • Fault-Tracing Information
    • Erasing Diagnostic Trouble Codes (DTCS)
    • Reading Off Diagnostic Trouble Codes (DTCS)
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information BCM-0108
• BCM-0108: Communication Between Control Modules. Communication Problems With The Steering Wheel Module (SWM), Control Module Not Initiated (B5254T7; 2011-13)
  • Communication Problems With The Steering Wheel Module (SWM), Control Module Not Initiated
  • Diagnostic Trouble Code (DTC) Information BCM-0108
• BCM-0109: Communication Between Control Modules. Steering Wheel Module (SWM), Internal Fault (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0109
  • Steering Wheel Module (SWM), Internal Fault
    • Information
• BCM-0109: Communication Between Control Modules. Steering Wheel Module (SWM), Internal Fault (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0109
  • Steering Wheel Module (SWM), Internal Fault
• BCM-0111: Communication Between Control Modules. AYC Stability Control Active For Too Long (2006-11)
  • AYC-Stability: Control Active For Too Long
    • Checking And Adjusting The Front Wheel Alignment
    • Erasing Diagnostic Trouble Codes (DTCS)
    • Reading Off Diagnostic Trouble Codes (DTCS)
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information BCM-0111
• BCM-0111: Communication Between Control Modules. AYC Stability Control Active For Too Long (B5254T7; 2011-13)
  • AYC-Stability: Control Active For Too Long
  • Diagnostic Trouble Code (DTC) Information BCM-0111
• BCM-0112: Body Sensor Cluster Stability Sensor (BSC). Sensor Not Calibrated (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0112
  • Sensor Not Calibrated
    • Fault-Tracing Information
    • Calibration
    • Reading Off The Status Of The Diagnostic Trouble Code (DTC)
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0112: Body Sensor Cluster Stability Sensor (BSC). Sensor Not Calibrated (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0112
  • Sensor Not Calibrated
• BCM-0113: Back-Up (Reversing) Signal. Signal Missing (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0113
  • Signal Missing
    • Checking Diagnostic Trouble Codes (DTCS) In The Central Electronic Module (CEM)
    • Checking The Transmission
    • Checking The Wiring And Terminals (Automatic Transmissions)
    • Internal Fault
      • Replacing The Component
    • Information
      • Fault-Tracing Information
    • Verification
• BCM-0113: Back-Up (Reversing) Signal. Signal Missing (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0113
  • Signal Missing
• BCM-0114: Communication With The Body Sensor Cluster Stability Sensor (BSC). Signal Missing (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0114
  • Signal Missing
    • Checking For Contact Resistance And Oxidation
    • Checking The Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0114: Communication With The Body Sensor Cluster Stability Sensor (BSC). Signal Missing (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0114
  • Signal Missing
• BCM-0115: Communication Between Control Modules. Communication With The Steering Wheel Module (SWM), Signal Missing (2006-11)
  • Communication With The Steering Wheel Module (SWM), Signal Missing
    • Checking Wiring And Terminals
  • Diagnostic Trouble Code (DTC) Information BCM-0115
• BCM-0115: Communication Between Control Modules. Communication With The Steering Wheel Module (SWM), Signal Missing (B5254T7; 2011-13)
  • Communication With The Steering Wheel Module (SWM), Signal Missing
  • Diagnostic Trouble Code (DTC) Information BCM-0115
• BCM-0116: Communication With The Body Sensor Cluster Stability Sensor (BSC). Communication Problems (2006-11)
  • Communication Problems
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Checking The Wiring
    • Checking Diagnostic Trouble Codes (DTCS)
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information BCM-0116
• BCM-0116: Communication With The Body Sensor Cluster Stability Sensor (BSC). Communication Problems (B5254T7; 2011-13)
  • Communication Problems
  • Diagnostic Trouble Code (DTC) Information BCM-0116
• BCM-0117: Communication With The Body Sensor Cluster Stability Sensor (BSC). Incorrect Body Sensor Cluster Stability Sensor (BSC) Installed (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0117
  • Incorrect Body Sensor Cluster Stability Sensor (BSC) Installed
    • Checking Body Sensor Cluster Stability Sensor (BSC)
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0117: Communication With The Body Sensor Cluster Stability Sensor (BSC). Incorrect Body Sensor Cluster Stability Sensor (BSC) Installed (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0117
  • Incorrect Body Sensor Cluster Stability Sensor (BSC) Installed
• BCM-0118: Power Supply For The Body Sensor Cluster Stability Sensor (BSC). Voltage Too High (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0118
  • Voltage Too High
    • Checking The Wiring
    • Checking The Control Module
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0118: Power Supply For The Body Sensor Cluster Stability Sensor (BSC). Voltage Too High (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0118
  • Voltage Too High
• BCM-0119: Power Supply For The Body Sensor Cluster Stability Sensor (BSC). Voltage Too Low (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0119
  • Voltage Too Low
    • Checking The Status Of The Diagnostic Trouble Code (DTC)
    • Checking The Wiring
    • Checking The Power Supply
    • Intermittent Fault
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0119: Power Supply For The Body Sensor Cluster Stability Sensor (BSC). Voltage Too Low (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0119
  • Voltage Too Low
• BCM-0121: Yaw Rate Sensor. Signal Outside Its Permitted Range (2006-11)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Outside Its Permitted Range
    • Checking The Connectors
    • Checking The Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0121: Yaw Rate Sensor. Signal Outside Its Permitted Range (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Outside Its Permitted Range
• BCM-0123: Body Sensor Cluster Stability Sensor (BSC). Internal Fault (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0123
  • Internal Fault
    • Checking The Status Of The Diagnostic Trouble Code (DTC)
    • Replacing The Body Sensor Cluster Stability Sensor (BSC)
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0123: Body Sensor Cluster Stability Sensor (BSC). Internal Fault (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0123
  • Internal Fault
• BCM-0130: Brake Pressure Sensor. Signal Missing (2006-11)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
    • Checking The Status Of The Diagnostic Trouble Code (DTC)
    • Replacing The Hydraulic Modulator
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0130: Brake Pressure Sensor. Signal Missing (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• BCM-0134: Brake Pressure Sensor. Incorrect Offset Value (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0134
    • Notes
    • Fault-Tracing Information
• BCM-0134: Brake Pressure Sensor. Incorrect Offset Value (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0134
  • Fault-Tracing Information
• BCM-0135: Brake Pressure Sensor. Signal Outside Its Permitted Range (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0135
  • Signal Outside Its Permitted Range
    • Checking The Status Of The Diagnostic Trouble Code (DTC)
    • Visual Check Of The Brakes
    • Replacing The Hydraulic Modulator
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0135: Brake Pressure Sensor. Signal Outside Its Permitted Range (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0135
  • Signal Outside Its Permitted Range
• BCM-0138: Power Supply For The Body Sensor Cluster Stability Sensor (BSC). Faulty Voltage (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0138
  • Faulty Voltage
    • Checking The Connectors
    • Checking The Body Sensor Cluster Stability Sensor (BSC)
    • Checking The Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0138: Power Supply For The Body Sensor Cluster Stability Sensor (BSC). Faulty Voltage (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0138
  • Faulty Voltage
• BCM-0145: Stability Control. Stability Control Has Been Active For Too Long (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0145
  • Stability Control Has Been Active For Too Long
    • Checking The Front Wheel Alignment
    • Checking The Body Sensor Cluster Stability Sensor (BSC)
• BCM-0145: Stability Control. Stability Control Has Been Active For Too Long (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0145
  • Stability Control Has Been Active For Too Long
• BCM-0146: Factory Test, Dynamic Stability And Traction Control (DSTC). Test Cycle Not Approved (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0146
  • Test Cycle Not Approved
    • Fault-Tracing Information
• BCM-0146: Factory Test, Dynamic Stability And Traction Control (DSTC). Test Cycle Not Approved (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0146
  • Test Cycle Not Approved
• BCM-0147: Pedal Position Sensor. Signal Outside Its Permitted Range (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0147
  • Signal Outside Its Permitted Range
    • Checking The Connectors
    • Checking The Wiring And Sensors
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0147: Pedal Position Sensor. Signal Outside Its Permitted Range (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0147
  • Signal Outside Its Permitted Range
• BCM-0148: Communication Between Control Modules. Faulty Configuration Id (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0148
  • Faulty Configuration Id
    • Information
      • Overview
      • Fault-Tracing Information
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Fault-Tracing Information
    • Intermittent Fault
    • Checking Diagnostic Trouble Codes (DTCS) In The Central Electronic Module
      • Checking Other Diagnostic Trouble Codes (DTCS)
    • Verification
• BCM-0148: Communication Between Control Modules. Faulty Configuration Id (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0148
  • Faulty Configuration Id
• BCM-0150: Stop Lamp Switch. Signal Outside Its Permitted Range (2006-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0150 (2006-2011)
  • Signal Outside Its Permitted Range (2006-07)
    • Checking The Stop Lamp Switch Connectors
    • Checking The Power Supply
    • Checking The Component And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
  • Signal Outside Its Permitted Range (2008-11)
    • Checking The Stop Lamp Switch Connectors
    • Checking The Power Supply
    • Checking The Component And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
  • Signal Outside Its Permitted Range (2011-13)
    • Checking The Stop Lamp Switch Connectors
    • Checking The Power Supply
    • Checking The Component And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• BCM-0150: Stop Lamp Switch. Signal Outside Its Permitted Range (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0150 (2006-11)
• BCM-0151: Control Module. Internal Memory Fault (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-0151
  • Internal Memory Fault
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Information
      • Fault-Tracing Information
• BCM-0151: Control Module. Internal Memory Fault (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-0151
  • Internal Memory Fault
• BCM-A030: Communication Between Control Modules. The Initialization Check Has Not Been Run (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-A030
  • The-Initialization: Check Has Not Been Run
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Erasing Diagnostic Trouble Codes (DTCS)
• BCM-A030: Communication Between Control Modules. The Initialization Check Has Not Been Run (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-A030
  • The-Initialization: Check Has Not Been Run
• BCM-A031: Communication Between Control Modules. The Tolerance Check Has Not Been Run (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-A031
  • The-Tolerance: Check Has Not Been Run
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Erasing Diagnostic Trouble Codes (DTCS)
• BCM-A031: Communication Between Control Modules. The Tolerance Check Has Not Been Run (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-A031
  • The-Tolerance: Check Has Not Been Run
• BCM-A032: Communication Between Control Modules. Stability Control Has Been Active For Too Long (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-A032
  • Stability Control Has Been Active For Too Long
    • Checking The Diagnostic Trouble Codes (DTCS)
• BCM-A032: Communication Between Control Modules. Stability Control Has Been Active For Too Long (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-A032
  • Stability Control Has Been Active For Too Long
• BCM-E000: Control Module Communication. Faulty Communication (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-E000
    • Notes
    • Faulty Communication (2006-07)
    • Faulty Communication
• BCM-E000: Control Module Communication. Faulty Communication (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-E000
• BCM-E003: Control Module. Faulty Configuration (2006-11)
  • Diagnostic Trouble Code (DTC) Information BCM-E003
  • Faulty Configuration (2006-07)
    • General Information
    • Verification
    • Taking Reading On Cable In The Can Network (HS-Can)
    • Checking The Traffic Load On The Can Cables
    • Identifying A Control Module In The Can Network
    • Information
      • Fault-Tracing Information
      • Faulty Configuration (2011-13)
• BCM-E003: Control Module. Faulty Configuration (B5254T7; 2011-13)
  • Diagnostic Trouble Code (DTC) Information BCM-E003
  • Faulty Configuration (2011-13)
• BCM-XXXX: Unknown Diagnostic Trouble Code (DTC) For The Current Control Module Version (2006-11)
  • Unknown Diagnostic Trouble Code (DTC) For The Present Control Module Version
    • Reading Off Diagnostic Trouble Codes (DTC)
• BCM-XXXX: Unknown Diagnostic Trouble Code (DTC) For The Current Control Module Version (B5254T7; 2011-13)
  • Unknown Diagnostic Trouble Code (DTC) For The Present Control Module Version