Central Locking, Keyless Entry System (2006-2007): Signals

The tables below summarize the input and output signals to the units in the central locking system. The signal types are divided into directly connected signals, serial communication and controller area network (CAN) communication.

CENTRAL ELECTRONIC MODULE (CEM) (4/56):

Input signals	Output signals
Directly connected:	Directly connected:
Switch for reduced alarm function for disengaging deadlocking Switch for valet locking of the glove compartment and cargo compartment Switch for opening the tailgate or trunk lid Switch for opening the fuel tank filler cover High/low beam switch for activating the approach lights Door open sensor Passenger door open sensor Right rear door open sensor to indicate when the door is open. Left rear door open sensor to indicate when the door is open. Tailgate/trunk lid open sensor Hood switch for indicating that the hood is open (cars with alarm) Signal for unlocking from the supplemental restraint system module (SRS) if the airbags are triggered.	Lock motor for the tailgate/trunk lid Lock motor for the fuel tank filler cover Indicator lamp in the switch for reduced alarm, indicates that the function is activated. Indicator lamp in doors, to indicate locking/unlocking.
Via Controller Area Network (CAN) communication:	Via Controller Area Network (CAN) communication:
Infotainment control module (ICM) for customer adaptation Driver door module (DDM) for locking and unlocking commands Passenger door module (PCM) for locking and unlocking commands Engine control module (ECM) for information about the status of the engine Brake control module (BCM) for information about vehicle speed Transmission control module (TCM), indicates the position of the gear selector. Keyless vehicle module (KVM) Convertible Roof Module (CRM)	Infotainment control module (ICM) for customer adaptation Driver door module (DDM) for locking and unlocking commands Passenger door module (PCM) for locking and unlocking commands Phone module (PHM) for unlocking via the Volvo On Call service. Keyless vehicle module (KVM) for the passive functions, locking, unlocking and starting. Convertible Roof Module (CRM)

DRIVER DOOR MODULE (DDM) (3/126) / PASSENGER DOOR MODULE (PCM) (3/127):

Input signals	Output signals
Directly connected:	Directly connected:
Indication of locked mode from the lock motor Central locking switch	Output signal for the central locking motor Output signal for the deadlock motor Output signal for the motors for central locking and deadlocking when unlocking.
Via serial communication:	Via serial communication:
Via Controller Area Network (CAN) communication:	Via Controller Area Network (CAN) communication:
Central electronic module (CEM) for locking and unlocking commands.	Central electronic module (CEM) for status information about the position of certain lock motors.

DRIVER INFORMATION MODULE (DIM) (5/1):

Input signals	Output signals
Via Controller Area Network (CAN) communication:	Via Controller Area Network (CAN) communication:
Information about whether the information lamp or warning lamp must be lit Information about which text message must be displayed.	-

PHONE MODULE (PHM) (16/60) (OPTION):

Input signals	Output signals
Via Controller Area Network (CAN) communication:	Via Controller Area Network (CAN) communication:
Central electronic module (CEM) for remote unlocking via the Volvo On Call service.	Central electronic module (CEM) for remote unlocking via the Volvo On Call service.

KEYLESS VEHICLE MODULE (KVM) (4/93):

Input signals	Output signals
Directly connected:	Directly connected:
Lock button contact breaker for locking, in the handle on the side doors Unlocking contact breaker in the handle on the side doors, indicates that the door handle has been pulled out Unlocking contact breaker for the cargo compartment, indicates that the unlock button is pressed in. Quick lock motor contact breaker in the side doors, the motors can be activated Key-in contact breaker, indicates that the start knob is pressed in. Brake pedal switch (AUT), indicates that the brake pedal is pressed Clutch switch (MAN), indicates that the clutch pedal is pressed Unlocking switch trunk lid / tailgate.	Inner antenna for communication with a key in the passenger compartment Antenna in the cargo compartment, for communication with keys External antennas in the door handle, for communication with keys External rear antenna, for communication with keys Quick lock motor left front, activating Quick lock motor right front, activating
Via serial communication:	Via serial communication:
Remote keyless entry (RKE) receiver, for receiving data from keys.	Remote keyless entry (RKE), control commands.
Via Controller Area Network (CAN) communication:	Via Controller Area Network (CAN) communication:
Central electronic module (CEM) during keyless entry Infotainment control module (ICM) when changing customer parameters.	Central electronic module (CEM) during keyless entry Infotainment control module (ICM) for customer adaptation

CONVERTIBLE ROOF MODULE (CRM) (4/59)

Input signals	Output signals
Directly connected:	Directly connected:
-	5 electric motors for controlling the lockable storage compartments: Motor ski hatch (8/139) Motor, storage compartment, driver's door (8/137) Motor, storage compartment, passenger door (8/138) Motor, storage compartment, side panel, left rear (8/140) Motor, storage compartment, side panel, right rear (8/141)
Via Controller Area Network (CAN) communication:	Via Controller Area Network (CAN) communication:
Central electronic module (CEM) during keyless entry	-