Upper Electronic Module (2003-2004): Design: Siren
Data from the siren (Siren Control Module) to the upper electronic module contains configuration and status information. This data is carried via serial communication.
When the alarm is activated the siren sends continuous status signals to the upper electronic module.
The siren is equipped with a battery and a built-in battery charger so that it is independent of the vehicle power supply. The battery charger maintains battery voltage in the integrated battery. When the alarm is activated the power supply is monitored for the siren and serial communication between the siren and the upper electronic module. The siren sounds if the car's power supply to the siren is broken or if communication between the upper electronic module and the siren is interrupted. The battery and the battery charger in the siren cannot be changed separately. The entire siren must be replaced if it is faulty.
The siren is located in a protected position under the fender liner in the front right-hand wheel arch. The siren must be configured after replacement. Configuration is carried out using VIDA (Volvo scan tool).
The siren can be diagnosed.