Engine Control Module (ECM) Diagnostic Trouble Codes - 4 Of 13

• ECM-290D: Fuel Pressure. Signal Too Low (B5254T2; B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-290D
  • Signal Too Low
    • Checking The Diagnostic Trouble Codes (DTCS)
    • Checking The Fuel Pressure Sensor
    • Checking Regulation Of The Fuel Pressure
    • Checking Components
    • Checking Components And Wiring
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification
• ECM-2910: Front Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Signal Missing (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing
    • Checking The Connector
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2910: Front Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Signal Too High (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2910: Front Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Signal Too Low (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2910: Front Lambda Probe Pre-Heating, Bank 2. Faulty Signal. Intermittent Fault. (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal. Intermittent Fault
    • Fault-Tracing Information
    • Information
      • Fault-Tracing Information
• ECM-2910: Front Lambda Probe Pre-Heating, Bank 2. Faulty Signal. Permanent Fault. (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal. Permanent Fault
    • Replacing The Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-291B: Fuel Pump Control Module. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-291B
  • Signal Too High/Signal Too Low/Signal Missing (2005)
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Signal Too High/Signal Too Low/Signal Missing (2006, 2007)
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-291B: Fuel Pump Control Module. Signal Missing (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-291B
  • Signal Too High/Signal Too Low/Signal Missing (2005)
  • Signal Too High/Signal Too Low/Signal Missing (2006)
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-291C: Fuel Pump Control Module. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-291C
  • Signal Too High/Signal Too Low/Signal Missing (2005)
  • Signal Too High/Signal Too Low/Signal Missing (2006, 2007)
• ECM-291C: Fuel Pump Control Module. Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-291C
  • Signal Too High/Signal Too Low/Signal Missing (2005)
  • Signal Too High/Signal Too Low/Signal Missing (2006)
• ECM-291D: Fuel Pump Control Module. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-291D
  • Signal Too High/Signal Too Low/Signal Missing (2005)
  • Signal Too High/Signal Too Low/Signal Missing (2006, 2007)
• ECM-291D: Fuel Pump Control Module. Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-291D
  • Signal Too High/Signal Too Low/Signal Missing (2005)
  • Signal Too High/Signal Too Low/Signal Missing (2006)
• ECM-2A00: Fuel Temperature Sensor. Faulty Signal (B5254T2; 2006)
  • Diagnostic Trouble Code (DTC) Information ECM-2A00
  • Fault-Tracing
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0A
  • Faulty Signal
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0A
  • Signal Missing
    • Checking The Connector
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0A
  • Signal Too High
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too Low (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0A
  • Signal Too Low
    • Checking The Wiring And Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A0B: Fuel Temperature Sensor. Signal Missing (B5254T2; 2006)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0B
  • Fault-Tracing
• ECM-2A0C: Fuel Temperature Sensor. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0C
  • Signal Too High
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A0C: Fuel Temperature Sensor. Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0C
  • Signal Too High
• ECM-2A0D: Fuel Temperature Sensor. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0D
  • Fault-Tracing
• ECM-2A0D: Fuel Temperature Sensor. Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-2A0D
  • Fault-Tracing
• ECM-2A10: Fuel Temperature Sensor. Signal Too High (B5254T2; 2006-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-2A10
  • Fault-Tracing
    • Checking The Status
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Permanent Fault
    • Checking For Air Leakage In The Exhaust System
    • Replacing The Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A1B: Fuel Temperature Sensor. Signal Too Low (B5254T2; 2006)
  • Diagnostic Trouble Code (DTC) Information ECM-2A1B
  • Fault-Tracing
• ECM-2A1C: Fuel Temperature Sensor. Signal Too High (B5254T2; 2006-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-2A1C
  • Fault-Tracing
    • Checking The Status
    • Checking The Component And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A1D: Fuel Temperature Sensor. Signal Too Low (B5254T2; 2006-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-2A1D
  • Fault-Tracing
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing
    • Checking The Connector
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking The Connector
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2B00: Thermostat. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-2B00
  • Faulty Signal
• ECM-2B00: Thermostat. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-2B00
  • Faulty Signal
• ECM-2C0B: Injector CYL 1. Signal Missing (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2C0C: Injector CYL 1. Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-2C0D: Injector CYL 1. Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal Or Signal Missing (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
    • Checking The Status
    • Checking Components And Connectors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking The Status
    • Checking Connectors And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking The Status
    • Checking The Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3000: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-3000
  • Internal Fault
• ECM-3000: Engine Control Module (ECM), Internal Fault. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-3000
  • Internal Fault
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal Or Signal Missing (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
    • Checking The Status
    • Checking Components And Connectors
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too High (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking The Status
    • Checking The Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too Low (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking The Status
    • Checking Connectors And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3010: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-3010
  • Internal Fault
• ECM-3010: Engine Control Module (ECM), Internal Fault. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-3010
  • Internal Fault
• ECM-3020: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-3020
  • Internal Fault
• ECM-3020: Engine Control Module (ECM), Internal Fault. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-3020
  • Internal Fault
• ECM-303C: Front Knock Sensor (KS). Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-303C
  • Signal Too High. Permanent Fault
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-303C: Front Knock Sensor (KS). Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-303C
  • Signal Too High. Permanent Fault
• ECM-303D: Front Knock Sensor (KS). Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-303D
  • Signal Too Low. Permanent Fault
    • Checking Wiring And Connectors
    • Checking The Knock Sensor (KS) Signal
    • Replacing The Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-303D: Front Knock Sensor (KS). Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-303D
  • Signal Too Low. Permanent Fault
• ECM-304C: Rear Knock Sensor (KS). Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-304C
  • Signal Too High. Permanent Fault
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-304C: Rear Knock Sensor (KS). Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-304C
  • Signal Too High. Permanent Fault
• ECM-304D: Rear Knock Sensor (KS). Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-304D
  • Signal Too Low. Permanent Fault
    • Checking Wiring And Connectors
    • Checking The Knock Sensor (KS) Signal
    • Replacing The Component
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-304D: Rear Knock Sensor (KS). Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-304D
  • Signal Too Low. Permanent Fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing
    • Checking Connectors And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3100: Misfire, At Least One Cylinder. Start Up (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-3100
  • Emissions Impact / Catalytic Converter Damage / Start Up
    • Checking The Fuel Injection System, Ignition System And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
    • Air-Leaks: In The Intake System, Checking
      • Notes
      • Removal
      • Installation
• ECM-3100: Misfire, At Least One Cylinder. Start Up (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-3100
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-310C: Misfire, At Least One Cylinder. Catalytic Converter Damage (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-310C
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-310C: Misfire, At Least One Cylinder. Catalytic Converter Damage (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-310C
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-310D: Misfire, At Least One Cylinder. Affects Emissions (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-310D
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-310D: Misfire, At Least One Cylinder. Affects Emissions (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-310D
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-3110: Misfire Cylinder 1. Start Up (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-311C: Misfire Cylinder 1. Catalytic Converter Damage (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-311D: Misfire Cylinder 1. Emissions Impact (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-3210: Misfire Cylinder 1, Start-Up. Start Up (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-321C: Misfire Cylinder 1, Three-Way Catalytic Converter (TWC) Damage. Catalytic Converter Damage (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-321D: Misfire Cylinder 1, Emissions Impact. Emissions Impact (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Emissions Impact / Catalytic Converter Damage / Start Up
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing. Intermittent Fault
    • Checking Cables And Connectors
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Intermittent Fault (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing. Intermittent Fault
    • Checking Cables And Connectors
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing. Permanent Fault
    • Checking Connector
    • Checking Wiring And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Permanent Fault (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing. Permanent Fault
    • Checking Connector
    • Checking Wiring And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Intermittent Fault
    • Checking Cables
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Intermittent Fault (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Intermittent Fault
    • Checking Cables
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Permanent Fault
    • Checking Wiring And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Permanent Fault (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Permanent Fault
    • Checking Wiring And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Intermittent Fault
    • Checking Cables
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Intermittent Fault (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Intermittent Fault
    • Checking Cables
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Permanent Fault
    • Checking Wiring And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Permanent Fault (B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Permanent Fault
    • Checking Wiring And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-330B: Engine Speed (Rpm) Sensor. Signal Missing (B5254T2; 2005-2007)
  • Signal Missing
    • Checking Connectors And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information ECM-330B
• ECM-330B: Engine Speed (Rpm) Sensor. Signal Missing (B6294T; 2005-2006)
  • Signal Missing
  • Diagnostic Trouble Code (DTC) Information ECM-330B
• ECM-3400: Camshaft Position (CMP) Sensor, Intake. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3400: Camshaft Position (CMP) Sensor, Intake. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High/Signal Too Low. Intermittent Fault
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High / Signal Too Low. Permanent Fault
    • Replacing The Component
    • Information
      • Fault-Tracing Information
• ECM-340B: Camshaft Position (CMP) Sensor, Intake. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
• ECM-340B: Camshaft Position (CMP) Sensor, Intake. Signal Missing (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
• ECM-340C: Camshaft Position Sensor, Intake. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-340C: Camshaft Position Sensor, Intake. Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
• ECM-340D: Camshaft Position Sensor, Intake. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-340D: Camshaft Position Sensor, Intake. Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
• ECM-3410: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3410: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Intermittent Fault
    • Checking Connectors And Wiring
    • Information
      • Fault-Tracing Information
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Permanent Fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Intermittent Fault
    • Checking Wiring And Connectors
    • Information
      • Fault-Tracing Information
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Permanent Fault
• ECM-341B: Camshaft Position (CMP) Sensor, Exhaust. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
• ECM-341B: Camshaft Position (CMP) Sensor, Exhaust. Signal Missing (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal Or Signal Missing
• ECM-341C: Camshaft Position Sensor, Exhaust. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-341C: Camshaft Position Sensor, Exhaust. Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
• ECM-341D: Camshaft Position Sensor, Exhaust. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking The Status
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-341D: Camshaft Position Sensor, Exhaust. Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
• ECM-3420: Knock Sensor (KS) Rear. Signal Too High. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Intermittent Fault
    • Checking Connectors And Wiring
    • Information
      • Fault-Tracing Information
• ECM-3420: Knock Sensor (KS) Rear. Signal Too High. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Permanent Fault
• ECM-3420: Knock Sensor (KS) Rear. Signal Too Low. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Intermittent Fault
    • Checking Wiring And Connectors
    • Information
      • Fault-Tracing Information
• ECM-3420: Knock Sensor (KS) Rear. Signal Too Low. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Permanent Fault
• ECM-34E0: Knock Sensor (KS), Offset. Signal Too High/Signal Too Low. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
    • Notes
    • Signal Too High/Signal Too Low. Intermittent Fault
• ECM-34E0: Knock Sensor (KS), Offset. Signal Too High/Signal Too Low. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High/Signal Too Low. Permanent Fault
• ECM-34F0: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High/Signal Too Low. Intermittent Fault
• ECM-34F0: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High/Signal Too Low. Permanent Fault
• ECM-3503: Misfire, At Least One Cylinder. Emissions Impact / Catalytic Converter Damage (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• ECM-350B: Ignition Coil Cylinder 1, Signal. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Missing
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-350C: Ignition Coil Cylinder 1, Signal. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-350D: Ignition Coil Cylinder 1, Signal. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-3513: Misfire Cylinder 1. Emissions Impact / Catalytic Converter Damage (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Emissions Impact / Catalytic Converter Damage
    • Checking The Fuel Injection System, Ignition System And Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
    • Compression Test