| Procedure |
Expected result |
Remarks |
| 1.
Insert the key and turn on the ignition. |
The lighting in the screen's button illuminates and the system is set to standby mode. |
|
| 2.
Activate the DVD device on the driver's side using the remote control by first pressing and then. |
Only the DVD device on the driver's side is activated and the Volvo emblem appears on the screen. |
If the DVD device on the passenger side is activated, the DVD device must be recoded. See: DESIGN - Service menu for changing DRIVER/PASSENGER settings |
| 3.
Activate the DVD device on the passenger side using the remote control by first pressing and then. |
Only the DVD device on the passenger side is activated and the Volvo emblem appears on the screen. |
If the DVD device on the driver's side is activated, the DVD device must be recoded. See: DESIGN - Service menu for changing DRIVER/PASSENGER settings |
| 4.
Ensure that the correct DVD region is coded in. This is done manually on each DVD device. |
|
See: DESIGN - Changing the region code in the DVD device |
| 5.
Ensure that the system is in standby and then switch off the ignition. |
|
|