Rain Sensor Module (RSM)

Fig 1: Locating Rain Sensor Module

Courtesy of VOLVO CARS CORPORATION

The rain sensor module (RSM) uses optical measurement to detect water on the windshield. An infrared beam of a fixed intensity lights part of the windshield. The intensity of the reflected beam is measured and compared to the intensity of the transmitted beam. If there is water on the surface of the windshield, the beam will be distorted and some of its intensity lost. If the beam is not fully reflected, this is interpreted as water on the windshield and the windshield wipers start.

The signals from the rain sensor module (RSM) to the upper electronic module (UEM) are carried via serial communication. The rain sensor module (RSM) transmits the signals to the upper electronic module (UEM). These signals request a particular windshield wiper speed (depending on the amount of rain falling on the windshield), indicate that a sudden large splash has hit the windshield and register the light conditions outdoors.

The rain sensor module (RSM) is in front of the rear view mirror on the inside of the windshield. Cars with rain sensor modules (RSM) have a special windshield.

The rain sensor module (RSM) is powered by the upper electronic module (UEM).

There are diagnostics for the rain sensor module (RSM).