LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2012 >> XC90 R-Design, FWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Electrical Components - Design And Function >> Supplemental Restraint System Module (SRS) (2003-2004) >> Function >> Roll Over Protection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Roll Over Protection

Fig 1: Identifying Roll Over Protection Components
GLL103757Courtesy of VOLVO CARS CORPORATION

If the side tilt of the car exceeds 50 - 55 degrees, the supplemental restraint system module (SRS) starts calculating the strength of the rotational energy. If the sideways lean and rotational energy are high enough, the control module will activate the roll over protection. All seat belt tensioners in the car, front (8/33, 8/34), rear (8/55, 8/56, 8/62) and for the third row of seats (8/94, 8/95) (if applicable) will be activated. The front (8/66, 8/67) and rear (8/96, 8/97) inflatable curtains will also be activated.

When the collision protection system has been activated a collision signal is transmitted from the supplemental restraint system module (SRS) (4/9) to the central electronic module (CEM) (4/56) and phone module (PHM) (16/60) on a directly connected cable. These two control modules ensure that:

A collision status signal is also sent to the phone module (PHM) and rear electronic module (REM) (4/58) on the Controller Area Network (CAN).