Engine Control Module (ECM) Diagnostic Trouble Codes - 8 Of 13

• ECM-941C: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-941C
  • Signal Too High
• ECM-941D: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-941D
  • Signal Too Low
    • Checking The Status
    • Checking The Power Supply
    • Checking The Connectors And Cables
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-941D: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-941D
  • Signal Too Low
• ECM-950C: Idle Air Trim. Signal Too Low (B5254T2; 2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• ECM-950D: Idle Air Trim. Signal Too High (B5254T2; 2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• ECM-951C: Engine Control Module (ECM), Idle Air Trim. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• ECM-951C: Engine Control Module (ECM), Idle Air Trim. Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• ECM-951D: Engine Control Module (ECM), Idle Air Trim. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• ECM-951D: Engine Control Module (ECM), Idle Air Trim. Signal Too Low (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• ECM-9520: Accelerator Pedal (AP) Position Sensor, Analog Signal. Faulty Signal (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
• ECM-9520: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too High (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
    • Checking The Status
    • Checking The Power Supply
    • Checking The Wiring
    • Checking The Connectors And Cables
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9520: Accelerator Pedal (AP) Position Sensor, Analog Signal. Signal Too Low (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking The Status
    • Checking The Power Supply
    • Checking Components And Wiring
    • Checking The Connectors And Cables
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-9530: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too High (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High
• ECM-9530: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Too Low (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
• ECM-9540: Accelerator Pedal (AP) Position Sensor, Digital Signal. Faulty Signal (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking The Connectors And Cables
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-960C: Engine Control Module (ECM), Torque Signal. Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-960C
  • Internal Fault
• ECM-960C: Engine Control Module (ECM), Torque Signal. Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-960C
  • Internal Fault
• ECM-9700: Accelerator Pedal (AP) Position Sensor, Digital Signal. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9700
  • Faulty Signal
• ECM-9700: Accelerator Pedal (AP) Position Sensor, Digital Signal. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9700
  • Faulty Signal
• ECM-970B: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-970B
  • Signal Missing
    • Checking The Connectors And Cables
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-970B: Accelerator Pedal (AP) Position Sensor, Digital Signal. Signal Missing (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-970B
  • Signal Missing
• ECM-9800: Engine Control Module (ECM), Torque Signal. Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9800
  • Internal Fault
    • Replacing The Component
    • Information
      • Fault-Tracing Information
• ECM-9800: Engine Control Module (ECM), Torque Signal. Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9800
  • Internal Fault
• ECM-980A: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-980A
  • Fault-Tracing Information
• ECM-980A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-980A
  • Internal Fault. Permanent Fault
• ECM-9810: Engine Control Module (ECM), Engine Speed (Rpm). Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9810
  • Internal Fault
• ECM-9810: Engine Control Module (ECM), Engine Speed (Rpm). Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9810
  • Internal Fault
• ECM-981A: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-981A
  • Fault-Tracing Information
• ECM-981A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-981A
  • Internal Fault. Permanent Fault
• ECM-9820: Engine Control Module (ECM), Load Signal. Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9820
  • Internal Fault
    • Replacing The Component
    • Information
      • Fault-Tracing Information
• ECM-9820: Engine Control Module (ECM), Load Signal. Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9820
  • Internal Fault
• ECM-982A: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; B6294T; 2003)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
• ECM-982A: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-982A
  • Fault-Tracing Information
• ECM-982A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; B6294T; 2003)
  • Diagnostic Trouble Code (DTC) Information
  • Internal Fault. Permanent Fault
    • Checking Diagnostic Trouble Codes (DTCS)
    • Fault-Tracing Information
    • Programming Or Replacing The Engine Control Module (ECM)
    • Information
      • Fault-Tracing Information
• ECM-982A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-982A
  • Internal Fault. Permanent Fault
• ECM-9830: Engine Control Module (ECM). Internal Fault (B5254T2; 2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9830
  • Internal Fault
    • Replacing The Component
    • Information
      • Fault-Tracing Information
• ECM-983A: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-983A
  • Fault-Tracing Information
• ECM-983A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-983A
  • Internal Fault. Permanent Fault
• ECM-983B: Engine Control Module (ECM). Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-983B
  • Internal Fault
• ECM-983B: Engine Control Module (ECM). Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-983B
  • Internal Fault
• ECM-983C: Engine Control Module (ECM). Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-983C
  • Internal Fault
• ECM-983C: Engine Control Module (ECM). Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-983C
  • Internal Fault
• ECM-983D: Engine Control Module (ECM). Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-983D
  • Internal Fault
• ECM-983D: Engine Control Module (ECM). Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-983D
  • Internal Fault
• ECM-9840: Engine Control Module (ECM). Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9840
  • Internal Fault
• ECM-9840: Engine Control Module (ECM). Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9840
  • Internal Fault
• ECM-984A: Engine Control Module (ECM), Load Signal. Internal Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-984A
  • Fault-Tracing Information
  • Internal Fault. Permanent Fault
    • Checking The Intake And Exhaust System
    • Programming Or Replacing The Engine Control Module (ECM)
    • Information
      • Fault-Tracing Information
• ECM-984B: Engine Control Module (ECM). Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-984B
  • Internal Fault
• ECM-984B: Engine Control Module (ECM). Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-984B
  • Internal Fault
• ECM-9850: Engine Control Module (ECM). Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9850
  • Internal Fault
• ECM-9850: Engine Control Module (ECM). Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9850
  • Internal Fault
• ECM-985A: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-985A
  • Fault-Tracing Information
• ECM-985A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-985A
  • Internal Fault. Permanent Fault
• ECM-9860: Engine Control Module (ECM). Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9860
  • Internal Fault
• ECM-9860: Engine Control Module (ECM). Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9860
  • Internal Fault
• ECM-986A: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-986A
  • Fault-Tracing Information
• ECM-986A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-986A
  • Internal Fault. Permanent Fault
• ECM-988A: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-988A
  • Fault-Tracing Information
• ECM-988A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; B6294T; 2004)
  • Diagnostic Trouble Code (DTC) Information ECM-988A
  • Internal Fault. Permanent Fault
• ECM-990A: Idle Air Trim. Faulty Signal (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing Information
    • Fault-Tracing Information
• ECM-9970: Memory Fault In Ram. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9970
  • Faulty Signal
• ECM-9970: Memory Fault In Ram. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9970
  • Faulty Signal
• ECM-9980: Memory Fault In ROM. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9980
  • Faulty Signal
• ECM-9980: Memory Fault In ROM. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9980
  • Faulty Signal
• ECM-9990: Engine Control Module (ECM). Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-9990
  • Faulty Signal
• ECM-9990: Engine Control Module (ECM). Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-9990
  • Faulty Signal
• ECM-A12B: Speed Signal. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-A12B
  • Fault-Tracing Information
• ECM-A12B: Speed Signal. Signal Missing (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-A12B
  • Fault-Tracing Information
• ECM-A12C: Speed Signal. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-A12C
  • Fault-Tracing Information
• ECM-A12C: Speed Signal. Signal Too High (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-A12C
  • Fault-Tracing Information
• ECM-A130: Control Module Communication (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-A130
  • Faulty Communication
    • General Information
    • Checking The Resistance Of The Control Area Network (Can) Cables
    • Checking A Short-Circuit In Can Cables
    • Checking The Traffic Load On The Can Cables
    • Identifying Fault Causes In The Can Network
    • Identifying A Control Module In The Can Network
    • Verification
    • Information
      • Fault-Tracing Information
• ECM-A130: Control Module Communication (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-A130
  • Faulty Communication
• ECM-B102400: Start Control Unit. General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102400
  • Fault-Tracing
    • Checking Components And Wiring
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification
• ECM-B102400: Start Control Unit. General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-B102400
  • Fault-Tracing
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
    • General Information
    • Taking Reading On Cable In The Can Network (HS-Can)
    • Checking The Traffic Load On The Can Cables
    • Identifying A Control Module In The Can Network
    • Verification
    • Information
      • Fault-Tracing Information
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
    • Information
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
• ECM-B10A268 Crash Input. Algorithm Based Failures. Event Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B10A268
  • Fault-Tracing Information
    • Information
• ECM-B10A268 Crash Input. Algorithm Based Failures. Event Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-B10A268
  • Fault-Tracing Information
• ECM-B10FF68 Ignition Control. Algorithm Based Failures. Event Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B10FF68
  • Fault-Tracing Information
• ECM-B10FF68 Ignition Control. Algorithm Based Failures. Event Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-B10FF68
  • Fault-Tracing Information
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-E000: Control Module Communication. Faulty Communication (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information ECM-E000
  • Faulty Communication
• ECM-E000: Control Module Communication. Internal Fault (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-E000
• ECM-E000: Control Module Communication. Internal Fault (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-E000
• ECM-E003: Configuration Fault. Faulty Configuration (B5254T2; B6294T; 2003-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Information About Combined Diagnostic Trouble Codes (DTCS)
• ECM-E003: Configuration Fault. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information ECM-E003
• ECM-E003: Configuration Fault. Faulty Signal (B6294T; 2005-2006)
  • Diagnostic Trouble Code (DTC) Information ECM-E003
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001100
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P001100
  • Fault-Tracing
• ECM-P001100: Intake Camshaft Position Control - Extended Too Far - (Bank 1). General Fault Information. Type Of Fault Not Specified. (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P001100
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001200
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P001200
  • Fault-Tracing
• ECM-P001200: Intake Camshaft Position Control - Returned Too Far - (Bank 1). General Fault Information. Type Of Fault Not Specified. (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P001200
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001268: Intake Camshaft Position Timing - Over-Retarded (Bank 1). Algorithm Based Failures. Event Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001268
  • Fault-Tracing Information
• ECM-P001268: Intake Camshaft Position Timing - Over-Retarded (Bank 1). Algorithm Based Failures. Event Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P001268
  • Fault-Tracing Information
• ECM-P001400: Controlling Camshaft Position Exhaust- Too Much Control- (Bank 1). General Fault Information. No Information About Fault Type (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P001400
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001500: Exhaust Camshaft Position Control - Returned Too Far - (Bank 1). General Fault Information. Type Of Fault Not Specified. (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P001500
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001600: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001600
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001600: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P001600
  • Fault-Tracing
• ECM-P001600: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No Sub Type Information (B8444S; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P001600
    • Checking The Status
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001600: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No Sub Type Information (B8444S; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001621: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too Low (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001692: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Performance Or Incorrect Operation (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P001692
  • Fault-Tracing
• ECM-P001700: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor B. General Failure Information. No Sub Type Information (B8444S; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001700: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor B. General Fault Information. No Information About Fault Type (B8444S; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P001700
    • Checking The Status
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001800: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001800
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001800: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P001800
  • Fault-Tracing
• ECM-P001800: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Failure Information. No Sub Type Information (B8444S; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001800: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Fault Information. No Information About Fault Type (B8444S; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P001800
    • Checking The Status
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001900: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor B. General Failure Information. No Sub Type Information (B8444S; 2008-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001900: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor B. General Fault Information. No Information About Fault Type (B8444S; 2005-2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P001900
    • Checking The Status
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P001A00 Intake (A) Cam Profile Control Circuit / Open (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Fault-Tracing Information
    • Verification
    • Information
      • Fault-Tracing Information
• ECM-P001A00 Intake (A) Cam Profile Control Circuit / Open (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001B00 Intake (A) Cam Profile Control Circuit Low (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001B00 Intake (A) Cam Profile Control Circuit Low (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001C00 Intake (A) Cam Profile Control Circuit High (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001C00 Intake (A) Cam Profile Control Circuit High (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P002100: Intake Camshaft Position Control - Extended Too Far - (Bank 2). General Fault Information. Type Of Fault Not Specified. (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P002100
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P002200: Intake Camshaft Position Control - Returned Too Far - (Bank 2). General Fault Information. Type Of Fault Not Specified. (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P002200
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P002400: Controlling Camshaft Position Exhaust - Too Much Control- (Bank 2). General Fault Information. No Information About Fault Type (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P002400
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P002500: Exhaust Camshaft Position Control - Returned Too Far - (Bank 2). General Fault Information. Type Of Fault Not Specified. (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault Tracing ECM-P002500
    • Checking Components
    • Verification
      • Verification, Part 1
      • Verification, Part 2
    • Information
      • Fault-Tracing Information
• ECM-P003100: Ho2S Heater Control Circuit Low (Bank 1, Sensor 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P003100
  • Fault-Tracing
    • Fault-Tracing Information
    • Verification
    • Information
      • Fault-Tracing Information
• ECM-P003100: Ho2S Heater Control Circuit Low (Bank 1, Sensor 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P003100
  • Fault-Tracing
• ECM-P003100: Heated Oxygen Sensor (Ho2S) Control Circuit Low (Bank 1, Sensor 1). General Fault Information. No Information About Fault Type (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-P003100
  • Fault Tracing ECM-P003100
    • Checking The Status
    • Checking Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-P003200: Ho2S Heater Control Circuit High (Bank 1, Sensor 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P003200
  • Fault-Tracing
• ECM-P003200: Ho2S Heater Control Circuit High (Bank 1, Sensor 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P003200
  • Fault-Tracing
• ECM-P003200: Heated Oxygen Sensor (Ho2S) Control Circuit High (Bank 1, Sensor 1). General Fault Information. No Information About Fault Type (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-P003200
  • Fault Tracing ECM-P003200
    • Checking The Status
    • Checking Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-P003600: Ho2S Heater Control Circuit (Bank 1, Sensor 2). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P003600: Ho2S Heater Control Circuit (Bank 1, Sensor 2). General Failure Information. No Sub Type Information (B8444S; 2010-2011)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Fault-Tracing Information
    • Verification
    • Information
      • Fault-Tracing Information
• ECM-P003700: Ho2S Heater Control Circuit Low (Bank 1, Sensor 2). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P003700
  • Fault-Tracing
• ECM-P003700: Ho2S Heater Control Circuit Low (Bank 1, Sensor 2). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P003700
  • Fault-Tracing
• ECM-P003700: Heated Oxygen Sensor (Ho2S) Control Circuit Low (Bank 1, Sensor 2). General Fault Information. No Information About Fault Type (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-P003700
  • Fault Tracing ECM-P003700
    • Checking The Status
    • Checking Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-P003800: Ho2S Heater Control Circuit High (Bank 1, Sensor 2). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P003800
  • Fault-Tracing
• ECM-P003800: Ho2S Heater Control Circuit High (Bank 1, Sensor 2). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P003800
  • Fault-Tracing
• ECM-P003800: Heated Oxygen Sensor (Ho2S) Control Circuit High (Bank 1, Sensor 2). General Fault Information. No Information About Fault Type (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-P003800
  • Fault Tracing ECM-P003800
    • Checking The Status
    • Checking Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-P003C00 Intake (A) Camshaft Profile Control Performance Or Stuck Off (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Dirty Or Damaged Cam Profile Solenoid (Cps).
    • Check Of Dirty Or Damaged Cam Profile Solenoid (Cps)
    • Information
      • Fault-Tracing Information
• ECM-P003C00 Intake (A) Camshaft Profile Control Performance Or Stuck Off (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information
  • Dirty Or Damaged Cam Profile Solenoid (Cps).
• ECM-P003D00 Intake (A) Camshaft Profile Control Stuck On (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Dirty Or Damaged Cam Profile Solenoid (Cps).
• ECM-P003D00 Intake (A) Camshaft Profile Control Stuck On (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information
  • Dirty Or Damaged Cam Profile Solenoid (Cps).
• ECM-P003F00 Intake (A) Camshaft Profile Control Stuck On (Bank 2). General Failure Information (B6324S5; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Dirty Or Damaged Cam Profile Solenoid (Cps).
• ECM-P005100: Ho2S Heater Control Circuit Low (Bank 2, Sensor 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P005100
  • Fault-Tracing
• ECM-P005100: Ho2S Heater Control Circuit Low (Bank 2, Sensor 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P005100
  • Fault-Tracing
• ECM-P005100: Heated Oxygen Sensor (Ho2S) Control Circuit Low (Bank 2, Sensor 1). General Fault Information. No Information About Fault Type (B8444S; 2005-2011)
  • Diagnostic Trouble Code (DTC) Information ECM-P005100
  • Fault Tracing ECM-P005100
    • Checking The Status
    • Checking Components
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-P005200: Ho2S Heater Control Circuit High (Bank 2, Sensor 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P005200
  • Fault-Tracing
• ECM-P005200: Ho2S Heater Control Circuit High (Bank 2, Sensor 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2014)
  • Diagnostic Trouble Code (DTC) Information ECM-P005200
  • Fault-Tracing