Stability Control
Stability is controlled by the brake control module (BCM) sending a signal to the engine control module (ECM) to reduce engine torque if a drive wheel should start to spin and there is a reduction in road grip. Stability control is operable between 0 km/h (0 mph) and top speed. For traction control, see TRACTION CONTROL .
Applies for V70 (08-), XC70 (08-), S80 (07-), XC60, (structure week -201119)
Stability control can be engaged or disengaged manually by turning the function selector on the left steering wheel stalk until "DSTC/ESC/spin control on/off" appears in the driver information module display. The selection is then confirmed by pressing the "Reset" button. All functions are connected when the ignition is turned on. If the stability function is disengaged, the other functions will operate normally.
Applies for S60 (11-) (structure week 201020-), and for S80 (07-), V70 (08-), XC70 (08-), V60, XC60, (structure week 201120-)
The stability function (Stability Control) can be activated and deactivated via the menu in Infotainment Control Module (ICM). When the ignition is turned on all functions are engaged. If the stability function is turned off the other functions work normally.