Removal And Installation

REMOVAL

NOTE:

Removal steps in this procedure may contain installation details.

Remove luggage compartment, front. Refer to: LUGGAGE COMPARTMENT, FRONT

Courtesy of VOLVO CARS CORPORATION

Loosen the clip.

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Torque: M6, 10Nm

Courtesy of VOLVO CARS CORPORATION

Pull the component in direction of the arrow.

TRANSFERRING COMPONENTS

Courtesy of VOLVO CARS CORPORATION

Remove the screw.

Remove the nuts.

Remove the marked part.

Torque: M6, 10Nm

INSTALLATION

To install, reverse the removal procedure.

NOTE:

This step is only necessary when installing a new component.

Order and download the appropriate software according to: VIDA/Software/Hardware Changes