Ignition Lock Key Transmitter Antenna Replacement - Left Side

Ignition Lock Key Transmitter Antenna Replacement - Left Side

Removal Procedure

1. Remove Rear Wheel (drivers side) - left. Refer to Tire and Wheel Removal and Installation (Service and Repair).
2. Remove the rear wheel liner. Refer to Rear Wheelhouse Panel Liner Replacement ([1][2]Rear Wheelhouse Panel Liner Replacement).
3. Disconnect the electrical connector.




4. Disconnect left antenna from snap fit mounting - left.

Installation Procedure




1. Push on the antenna to engage the antenna to the retaining bracket.
2. Connect the antenna wire lead to the antenna.
3. Install the rear wheel liner. Refer to Rear Wheelhouse Panel Liner Replacement ([1][2]Rear Wheelhouse Panel Liner Replacement).
4. Install the rear wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).