LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 3 L4-2.5L >> Repair and Diagnosis >> Body and Frame >> Splash Guard >> Service and Repair >> Splash Shield Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Splash Shield Removal/Installation





SPLASH SHIELD REMOVAL/INSTALLATION

Front Splash Shield

1. Remove the screws and fastener then remove the front splash shield.






2. Install in the reverse order of removal.

Rear Splash Shield

1. Remove the fastener, screws and capnut.






2. Pull the rear splash shield in the direction of the arrow shown in the figure, then remove the hooks.






3. Install in the reverse order of removal.

scientia non olet · About LEMON Manuals