Windshield Washer Reservoir: Service and Repair

WASHER TANK REMOVAL/INSTALLATION

Vehicles with the washer fluid-level sensor

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the front bumper. Front Bumper Removal/Installation

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

Vehicles without the washer fluid-level sensor

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the front bumper. Front Bumper Removal/Installation

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

Cap Installation Note

CAUTION:
- After installing the cap, verify that there is no gap between the upper part of the cap and the bottom surface of the washer tank. Otherwise, water leakage could occur.