Ignition Coil: Service and Repair

IGNITION COIL REMOVAL/INSTALLATION [MZI 3.7 V6]

1. Disconnect the negative battery cable.

2. Remove the engine cover. Engine Cover Removal/Installation

3. Remove the dynamic chamber. Service and Repair

4. Remove in the order indicated in the table.

CAUTION:
- Apply small amount of the specified dielectric grease to the inside of the ignition coils, then install the ignition coils to the spark plugs.

- Specified grease: Motorcraft XG-3A

5. Install in the reverse order of removal.