Programming and Relearning

Procedure after ECM Replacement

NOTE:

When ECM and keyless start control module are replaced with new ones at the same time, perform "Immobilizer Key Registration" instead of "ECM Registration" using SUZUKI scan tool and immobilizer cable. Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual" for the immobilizer registration.

After ECM is replaced with new one, perform the following procedures:
1) Program calibration data to ECM. Refer to "Suzuki ECU Programming System Operator's Manual".
2) Register VIN data to ECM. VIN Registration
3) Perform "ECM Registration". Programming and Relearning
4) Perform electric throttle control system calibration. Testing and Inspection