Keyless Start Transmitter: Testing and Inspection

Remote Controller Registration

NOTE:

Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual" for the procedure of immobilizer registration.

- Register remote controller ID code using "Immobilizer Key Registration" function in SUZUKI scan tool.
- Remote controller registration is performed through "Immobilizer Key Registration", and this registers the immobilizer transponder code.
- As performing "Immobilizer Key Registration" clears all of the ID codes already registered, get all of remote controllers ready for the registration.
- It is possible to register 4 remote controllers in keyless start control module.
- If the keyless start control module is replaced, register all of the remote controllers.
- If all of the remote controllers are lost, replace keyless start control module.