LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1988 >> Legend Base, 4D Sedan, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Power Windows >> Testing >> Driver's Switch Test >> Driver's Switch
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Driver's Switch

Remove door trim panel. Check for continuity between specified switch terminals with switch in each position. If continuity is not as specified, replace switch. See Fig 1 . See appropriate POWER WINDOW DRIVER'S SWITCH TEST table.

NOTE: The driver's switch cannot be isolated for testing. Perform SWITCH INPUTS TEST. See Figure . If inputs are normal, but driver's switch does not operate properly, replace driver's switch assembly.
POWER WINDOW DRIVER'S SWITCH TEST

Position Main Switch Pin Continuity
Switch Light N/A 8-1
Driver's Switch
Up N/A 12-3
Off N/A No Continuity
Down N/A 3-13
Down (Auto) N/A 3-13-11
Right Front Switch
Up On 14-15; 16-17
Off 14-15
Off On 15-16-17
Off 15-17
Down On 14-17; 15-16
Off 14-17
Right Rear Switch
Up On 4-10; 16-9
Off 4-10
Off On 10-16-9
Off 10-9
Down On 4-9; 10-16
Off 4-9
Left Rear Switch
Up On 7-6; 16-5
Off 7-6
Off On 6-16-5
Off 6-5
Down On 7-5; 6-16
Off 7-5
Fig 1: Master Switch Terminal ID
G50G15699Courtesy of AMERICAN HONDA MOTOR CO., INC.