Ignition Coil Resistance (Legend)

Remove harness from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" of ignition coil. See Fig 2.

Resistance should be .99-1.1 ohms at 77°F (25°C). Replace coil if resistance is not within specification. Resistance value for secondary winding is not available.

IGNITION COIL RESISTANCE Ohms @ 68°F (20°C)

Application

Primary

Secondary

Integra

.6-.8

9760-14,640

Legend

.99-1.1

⁽¹⁾

⁽¹⁾	Information is not available from manufacturer.

Fig 1: Testing Ignition Coil (Integra)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Testing Ignition Coil (Legend)

Courtesy of AMERICAN HONDA MOTOR CO., INC.