September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Pump Pressure Check
- Check fluid level and belt tension. Adjust as necessary. Disconnect outlet hose from pump. On Integra, install Pump Joint Adapter (07GAK-SE00110
) on pump outlet. On Legend, install Pump Joint Adapter (07GAD-SE00112
) on pump outlet.
- On all models, install Hose Joint Adapter (07GAK-SE00120
) to outlet hose. Install Pressure Gauge Set (07406-0010000
) between pump and hose joint adapters. Fully open shutoff and pressure control valves.
- Start engine and let idle. Turn steering wheel lock-to-lock several times until fluid is at operating temperature. Completely close shutoff valve.
CAUTION:
DO NOT keep shutoff valve closed for more than 5 seconds, or pump could be damaged.
- Gradually close pressure control valve until pressure gauge needle stabilizes. Read pressure. Fully open shutoff valve. Pump pressure should be at least 1138-1280 psi (80-93 kg/cm2
). Repair or replace pump if pressure is not within specification.