Switch Inputs Test

Turn ignition off. Remove driver's door panel. Unplug connectors from master switch. Using a DVOM, perform switch input tests in Fig 1 , Fig 2 , Fig 3 or Fig 4 . If all input test results are okay, inspect connector and terminals for damage and proper fit. If connector is okay and power windows still malfunction, replace master switch.

Fig 1: Switch Inputs Test (Coupe)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Connector (View From Wire Side - Coupe)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Switch Inputs Test (Sedan)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 4: Connector (View From Wire Side - Sedan)

Courtesy of AMERICAN HONDA MOTOR CO., INC.