October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Cranking Test
- Connect a voltmeter and ammeter to battery. See Fig 1
. Disconnect connector from distributor. Ignition control module is located on right side of engine compartment.
- Use remote starter switch to crank engine. Check cranking voltage and current draw. Ensure voltage is at least 8 volts. Current draw should be less than 350 amps. Cranking speed should be greater than 100 RPM.
Courtesy of AMERICAN HONDA MOTOR CO., INC.