LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1994 >> NSX Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Service & Adjustment Specifications >> Quick-Service >> Normal Service Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Service Conditions

REPLACEMENT INTERVALS

Component Months Miles
Air Filter 24 30,000
Anti-Lock Brake System High Pressure Hose 48 60,000
Brake Fluid (Including Anti-Lock) 24 30,000
Coolant (1) 36 (1) 45,000
Engine Oil & Filter 6 7500
Fuel Filter & Hoses 48 60,000
Spark Plugs 48 60,000
Timing Belt 72 90,000
Transaxle Fluid 24 30,000
(1) First change is at 36 months/45,000 miles and every 24 months/30,000 miles thereafter.
INSPECTION INTERVALS

Component Months Miles
Brakes
Anti-Lock Brake System Operation 24 30,000
Brake Hoses & Lines (Including Anti-Lock Brake System) 12 15,000
Front Brake Calipers, Discs & Rotors 12 15,000
Front Brake Pads 6 7,500
Parking Brakes 12 15,000
Rear Brake Calipers, Discs, Pads & Rotors 12 15,000
Catalytic Converter Heat Shield 48 60,000
Cooling System Hoses & Connections 24 30,000
Exhaust System
Exhaust Pipe In Front Of Catalytic Converter 24 15,000
Exhaust Pipe & Muffler After Catalytic Converter 12 15,000
Front Wheel Alignment 12 15,000
Fuel Lines, Hoses & Connections 24 30,000
Generator Drive Belt 24 30,000
Idle Speed & Idle CO 48 60,000
PCV Valve 48 60,000
Power Steering System 12 15,000
SRS 10 Years After Production -
Steering Operation, Tie Rod Ends, Steering Gearbox & Boots 12 15,000
Suspension Mounting Bolts 12 15,000
Valve Clearance 12 15,000
Water Pump 72 90,000
BELT ADJUSTMENT - TENSION GAUGE METHOD (1)

Application New Belt Used Belt
Generator 176-198 lbs. (80-90 kg) 86-108 lbs. (40-50 kg)
Compressor (2) (2)
(1) Belt tension is measured at center of longest run.
(2) Information is not available from the manufacturer.
BELT ADJUSTMENT - DEFLECTION METHOD (1)

Application New Belt Used Belt
Generator 0.28-0.35" (7-9 mm) 0.47-0.55" (12-14 mm)
Compressor 0.22-0.30" (5.5-7.5 mm) 0.39-0.47" (10-12 mm)
(1) Belt deflection is measured at center of longest belt run at 22 lbs. (10 kg) pressure.