October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Relieving System Pressure
- Drain brake fluid from master cylinder and modulator reservoir. Remove Red cap from maintenance bleeder screw. See Fig 1
.
- Using ABS "T" Wrench (07HAA-SG00100 or 07HAA-SG00101), loosen maintenance bleeder screw 1/4 turn to release high pressure fluid into reservoir. Turn "T" wrench one complete turn to relieve remaining accumulator line pressure. Tighten bleeder screw, and install Red cap.
Courtesy of AMERICAN HONDA MOTOR CO., INC.