LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1996 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VTEC - GS-R >> Overhaul >> Cylinder Block Assembly >> Cylinder Block
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cylinder Block

  1. Measure cylinder bore out-of-round and taper. If either out-of-round or taper exceeds 0.002" (0.05 mm), re-bore cylinder for oversize pistons. If any cylinder exceeds oversize bore service limit, replace cylinder block. See CYLINDER BLOCK  under ENGINE SPECIFICATIONS.
  2. Using a feeler gauge and straightedge, measure cylinder block deck surface warpage. Service limit is 0.003" (0.08 mm). If cylinder bore is okay, hone cylinder to obtain a 60-degree crosshatch pattern. After honing, wash cylinder bore with hot soapy water. Air-dry cylinder bore, and apply engine oil to prevent rusting.
scientia non olet · About LEMON Manuals