Cruise Control Switch
- If necessary, remove cruise control switch (part of combination switch assembly). See COMBINATION SWITCH removal and installation procedure in the STEERING COLUMN SWITCHES article. See Fig 1 .
- Disconnect cruise control switch harness connector. Check continuity between terminals specified in CRUISE CONTROL SWITCH TEST table. Replace cruise control switch if it does not test as specified.
CRUISE CONTROL SWITCH TEST
| Switch Position | Terminals No. | |
|---|---|---|
| Set/Coast | ||
| On | 9 & 10; 12 & 13 | |
| Off | 12 & 13 | |
| Cancel | None | |
| Resume/Accel | ||
| On | 12 & 13 | |
| Tap Up/Down | 12 & 13 | |
| Resume (Accel) | 9 & 11; 12 & 13 | |