Spark Check
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1998 Acura Integra, 1998 Acura 3.5RL, 1998 Acura 3.2TL, 1998 Acura 3.0CL, and 1998 Acura 2.5TL. However, it is still accessible from the selected car via links, so may be relevant.
- Crank engine. Using a high output spark tester, test for a strong Blue spark at each secondary ignition plug wire. If spark is not as described, go to next step.
- Verify resistance of each spark plug wire is not more than 25,000 ohms at 68°F (20°C). Check inside distributor cap and rotor for rough or pitted terminals. Check distributor cap for cracks, wear, and damage. Repair or replace as necessary.
- Disconnect and inspect all related ignition system connectors and harness. Clean or repair as necessary, and recheck spark. If strong Blue spark is still not present, go to IGNITION CONTROL MODULE INPUT TEST .