Bench Testing: Rotor: 2.5TL
WARNING: This page is about a different car, the 1998 Acura Integra and 1998 Acura 2.5TL. However, it is still accessible from the selected car via links, so may be relevant.
Ensure rotor bearings rotate smoothly. Using ohmmeter, check continuity between slip rings and rotor, individually. Check continuity between slip rings and rotor shaft, individually. See Fig 1 . If continuity exists, replace rotor. Check resistance between slip rings. Resistance should be 1.8-3.0 ohms. Replace rotor if resistance is not to specification.