LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1998 >> 3.5RL Special Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Generators & Regulators) >> Bench Testing >> Rectifier Diodes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rectifier Diodes

WARNING: This page is about a different car, the 1998 Acura Integra and 1998 Acura 2.5TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check continuity between rectifier assembly terminal "B" and terminals P1-P5, and between terminals "E" and P1-P5. See Fig 1 . Note ohmmeter reading.
  2. Reverse leads, and repeat test. Continuity should exist only in one direction. If continuity is not as specified, replace rectifier assembly.
Fig 1: Identifying Rectifier Terminals
G98A04258Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals