Cruise Control Main Switch: 3.2TL
- Remove Traction Control System (TCS) and cruise control main switch from driver's switch panel. Disconnect cruise control main switch 8-pin connector. With switch in OFF position, continuity should exist between cruise control main switch terminals No. 1 and 2, and between terminals No. 4 and 7. See Fig 1
. Go to next step.
- With cruise control main switch in ON position, continuity should exist between cruise control main switch terminals No. 1 and 2, and between terminals No. 4, 5 and 7. See WIRING DIAGRAMS
. If continuity is not present as specified, replace TCS/cruise control main switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.