Starter Solenoid Test: 3.5RL
WARNING: This page is about a different car, the 2001 Acura MDX, 2001 Acura Integra, 2001 Acura 3.5RL, 2001 Acura 3.2TL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
Remove starter solenoid from starter. With starter solenoid plunger in released position, continuity should exist between terminals "M" and "S" and solenoid housing (ground). See Fig 1 . With starter solenoid plunger pushed in, continuity should exist between terminals "B", "M" and "S" and solenoid housing. If continuity is not as specified, replace solenoid.