LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2003 >> RSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> 3rd Clutch Transmission Fluid Pressure Switch Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

3rd Clutch Transmission Fluid Pressure Switch Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the connector from the 3rd clutch transmission fluid pressure switch (A).
    Fig 1: Disconnecting Connector From 3rd Clutch Transmission Fluid Pressure Switch And Torque Specifications
    G03651857Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the 3rd clutch transmission fluid pressure switch, then install a new one with a new sealing washer (B). Tighten the switch to the specified torque.
  3. Reconnect the connector, making sure there is no water, oil, dust, or foreign particles inside the connector.
scientia non olet · About LEMON Manuals