DTC 81: TPMS Control Unit Failure (RAM/ROM/ADC/EEPROM/ALU) Check
NOTE:
Low battery voltage can cause this DTC. Make sure the battery is fully charged and in good condition.
- Clear the DTC (see HOW TO CLEAR TPMS DTCS ).
- Turn the ignition switch OFF, then turn it ON (II) again.
Is DTC 81 indicated?
- YES - Check for loose wires or poor connections at the TPMS control unit connectors. If necessary, substitute a known-good TPMS control unit and recheck.
- NO - The system is OK at this time.