September 30: LEMON manuals is back up on a temporary server! Slowness is possible
ECT Sensor Replacement
- Drain the engine coolant (see COOLANT REPLACEMENT
).
- Remove the intake manifold (see REMOVAL
).
- Disconnect the ECT sensor 2P connector (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the ECT sensor (B).
- Install the sensor in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see COOLANT REPLACEMENT
), and bleed air from the cooling system with the heater valve open.