LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2006 >> TL Standard >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> MAP Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

MAP Sensor Replacement

  1. Remove the intake manifold cover (see step 1 on REMOVAL ).
  2. Disconnect the MAP sensor 3P connector (A).
    Fig 1: Disconnecting MAP Sensor 3P Connector
    G03659533Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screw (B).
  4. Remove the MAP sensor (C).
  5. Install the sensor in the reverse order of removal with a new O-ring (D).
scientia non olet · About LEMON Manuals