Rearview Camera Inputs and Outputs for 6P Connector
WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTOR TERMINAL REFERENCE CHART
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| 1 | GRN | CAMERA ADPT (Adaptive camera) | Control signal for rearview camera | 0 V | If open: No rearview camera image. If short to ground: No change to rearview camera image. |
||
| 2 | GRY(1) | CAMERA SH (Shield and ground for camera) | Shield for terminal No. 5 | 0 V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. |
||
| 3 | BLU | VIDEO (Video camera) | Video signal for rearview camera | 0.3 V | If open: No rearview camera image. If short to ground: When put into reverse, navigation screen goes black (display backlight still operative). |
||
| 4 | YEL | VIDEO GND (Ground camera) | Ground for camera signal | 0 V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. |
||
| 5 | RED | CAMERA GND (Ground) | Ground for rearview camera | 0 V | If open: No change to rearview camera image. If short to ground: No change to rearview camera image. |
||
| 6 | WHT | CAMERA VCC (VCC supply) | Power source for rearview camera | 8 V | If open: No rearview camera image. If short to ground: When put into reverse, navigation screen goes black (display backlight still operative). |
||
|
|||||||