LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2007 >> TSX Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Output Shaft (Countershaft) Speed Sensor Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Output Shaft (Countershaft) Speed Sensor Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the output shaft (countershaft) speed sensor connector, and remove the output shaft (countershaft) speed sensor.
  2. Install a new O-ring (A) on a new output shaft (countershaft) speed sensor (B), then install the output shaft (countershaft) speed sensor in the transmission housing.
    Fig 1: O-Ring And Output Shaft (Countershaft) Speed Sensor W/Torque Specification
    G05491356Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check the connector for rust, dirt, or oil, and clean if necessary, then connect the connector securely.