Check these items before using the sensor input display mode
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to ON (II), and check the recirculation door function, press the recirculation button to switch from FRESH to RECIRC The air volume and sound should change slightly
- Set the desired test temperature using the driver's control switch
Press the SYNC button off, the LED turns off
When selecting the test temperature, note these items
- "Lo" temperature setting will default to MAX COOL, VENT, and RECIRC
- "Hi" temperature setting will default to MAX HOT, HEAT, and FRESH
- through 86°F settings will use the automatic climate control logic
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode