September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Back-up Light Switch Test
- Disconnect the back-up light switch connector.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Check for continuity between the back-up light switch 2P connector terminals No. 1 and No. 2. There should be continuity when the change lever is in only reverse.
- If necessary, replace the back-up light switch. Apply liquid gasket (P/N 08718-0001 or 08718-0012) to the switch threads, and install the switch on the transmission housing.