MICU Control Functions Index
The MICU (built into the under-dash fuse/relay box) is one of the B-CAN components. The MICU controls many systems related to the body controller area and security system, and also works as a gateway to the diagnose the other B-CAN connected ECUs with the HDS.
Refer to the each system circuit diagram in detail.
SYSTEM FUNCTION CHART
| System | Function |
|---|---|
| Multiplex Control | Sends the switch input signal information to the MICU and outputs the information. The MICU controls the ECUs electric load and communication based upon the information received the B-CAN. |
| On-Board Diagnosis | The MICU has a gateway function which sends the results of the MICU internal diagnosis and the B-CAN connected ECUs diagnosis to the HDS. |
| Self-Diagnosis | Test mode 1 diagnoses the communication line between the MICU and B-CAN connected unit. Test mode 2 checks the switch inputs connected to the MICU. |
| Interior Light(s) | The MICU controls the interior lights ON, OFF and dimming based upon the information of the related switches and/or the B-CAN related information. |
| Sleep Function | The MICU has a sleep function, which it enters during the power down mode. |
The MICU also controls the function of these circuits:
- Entry lights control (map lights and ceiling light)
- Exterior lights control (including the daytime running lights control)
- Horn
- Interlock system
- Key-in reminder
- Keyless entry
- Lights-on reminder
- Power door locks
- Seat belt reminder
- Security alarm
- Turn signal/hazard flasher
- Wiper/washer