Recirculation Control Motor Replacement: Installation

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Make sure the damper lever pins in the motor lever are visible through the holes

Fig 1: Identifying Damper Lever Pins And Motor Lever Holes
Courtesy of AMERICAN HONDA MOTOR CO., INC.
While holding the recirculation control motor (A), install the self-tapping screws and connect the 7P connector (B)

Fig 2: Identifying Recirculation Control Motor And 7P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Reinstall the climate control unit
After installation, make sure the motor runs smoothly