Rearview Camera Inputs and Outputs
WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
REARVIEW CAMERA 12P CONNECTOR TERMINAL REFERENCE
| Terminal Number | Wire Color | Terminal Name | Description | Voltage (about) | Symptom | ||
|---|---|---|---|---|---|---|---|
| 7 | BRN | CAMERA ADPT (Adaptive camera) | Control signal for rearview camera | 0V | If open No change to rearview camera image If short to ground No change to rearview camera image |
||
| 8 | GRY(1) | CAMERA SH (Shield camera) | Shield for terminals No 7, 9, 10, 11, 12 | 0V | If open No change to rearview camera image If short to ground No effect on system |
||
| 9 | WHT | CAMERA V (Video camera) | Video signal for rearview camera | 0 3 V | If open No change to rearview camera image If short to ground No change to rearview camera image |
||
| 10 | RED | VCC GND (Ground camera) | Ground for camera signal | 0V | If open No change to rearview camera image If short to ground No change to rearview camera image |
||
| 11 | BLK | CAMERA GND (Ground) | Ground for rearview camera | 0V | If open No change to rearview camera image If short to ground No change to rearview camera image |
||
| 12 | GRN | CAMERA VCC (VCC supply) | Power source for rearview camera | 8V | If open No rearview camera image If short to ground When put into reverse, the navigation screen goes black (display backlight still operative) |
||
|
|||||||