TPMS Reset Procedures: Notes

NOTE: When a tire pressure sensor is replaced or tires are rotated, the sensor ID must be memorized by the TPMS control unit. See Memorizing Sensor ID (Automatically) . If the TPMS control unit has also been replaced, the Honda Diagnostic System (HDS) or a OBD-II compatible scan tool must be used to program information into new TPMS control unit. See Memorizing Sensor ID (Using HDS) .

NOTE: Misalignment of the control unit and initiators could interfere with sending and receiving signals. Ensure brackets on TPMS control unit and front initiators are not bent.

When the tire pressure warning light illuminates and warning message appears, immediately check air pressure of all tires and adjust to the specified pressure. Ensure warning indicators go out.