Front passenger's
- Removal the front passenger's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
- Disconnect the 14P connector (A) from the power window switch.
- Remove the front passenger's door sub harness (B) from the power window switch.
- Remove the three screws from the door panel, then pull up on the door pocket (C) to release the clips.
- Remove the three screws and the power window switch (A) from the door panel.
- Remove the four screws and the power window switch.
- Install the switch in the reverse order of removal.
- After replacement, reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).